I have registered but when i try to login on the app it says " cannot find the user " What must i do ?
Answer by
Swati Dubey
The issue you are facing might be due to a registration or login error. Please ensure that you have entered the correct username and password. If you are certain that your login credentials are correct, try reinstalling the WatchPower app and then attempt to login again. If the issue persists, you may want to contact the support team of WatchPower for further assistance.
It seems that the user has completed all the steps successfully but is having trouble registering on the WatchPower app. Additional information would be required to provide a solution.
I have added a new device on watchPower but cannot see it at all. also I can see the device and its working on Fronus Solar. Please help Thanks
Answer by
Swati Dubey
It seems like there may be an issue with the WatchPower program not displaying the newly added device. However, the device is visible and functioning on Fronus Solar. The user is seeking help in resolving this issue.
Hi, I need to install WatchPower on a Raspberry Pi 3 with Raspbian as operative system. How can I install the software? I tried to copy the directory WatchPower on desktop and to execute the file WatchPower but it doesn't work. Thank in advance for your answer.
S
Answer by
Sean Hill
You need to download the correct version of WatchPower for your Raspbian installation. I know that Raspbian works with 64bit architecture, therefore the Linux x64 package is needed.
Access the following link and save the Linux X64 package. Extract it using the following command unzip file.zip -d destination_folder (for example unzip 1.11WatchPower-linux-64bit.zip -d /tmp/watchpower)
Browse to the extraction folder using cd /tmp/watchpower and then type ./WatchPower. If you need to make the file executable, type chmod +x WatchPower and then run the command.
Just installed and its as useful a teets on a bull because i cannot log in
W
Answer by
WatchPower
4.1.2. Password It’s password configuration for administrator only . Before operating and configuring the software, please login first and mo dify the password. The default password is administrator at first log in Users can only browse i nverter s tatus and information as Guest without login as an Administrator . A g uest ca n not control or execute any setting.
WatchPower 1.09 has no installer. I faced rights issues on Windows 10 putting the extraction folder on D drive. Application's interface simply does not open. Changing the location on desktop started the application. When are you plan to release the installer or please provide to users more info related to the product installation?
A
Answer by
Alex Urbach
I've installed this application on Windows 19 64bit and it works just fine. There were no errors with the security rights. When I've initiated the install procedure, I've used Run as Administrator on the installation package and everything worked out of the box. The same goes for the starting of the application. I've used the same method on a Windows 10 x64 computer and there were no errors.
I forgot the logging username to my wifi watchpower android app and now I'm stuck at login page, please help
A
Answer by
Ali
Iam buing a used voltronic inverter,and i discover that there is an existing account for this inverter.so please i want to register a new private accout.
To deregister a module and start fresh in WatchPower for Windows, you can try uninstalling and then reinstalling the program. Alternatively, you can try contacting the software developer for specific instructions on how to deregister a module.
Can I use this software to monitor my Axpert inverter remotely, e.g. from work?
R
Answer by
Robert Polubinski
The software supports remote features like SNMP for sending an email when something bad happens with the software or the monitored devices.
I kindly recommend downloading the official user guide for the software which explains the functionality of the software and how it can be configured for various operations including remote connection and administration.
How do I register on the Watchpower app without Wifi. I have a Kodak OG5.48 inverter that works with bluetooth.
A
Answer by
Ashish Bajaj
Unfortunately, registration on the WatchPower app requires internet access, either through wifi or mobile data. Without internet access, it is not possible to register on the app.
I have registered but when i try to login on the app it says " cannot find the user " What must i do ?
The issue you are facing might be due to a registration or login error. Please ensure that you have entered the correct username and password. If you are certain that your login credentials are correct, try reinstalling the WatchPower app and then attempt to login again. If the issue persists, you may want to contact the support team of WatchPower for further assistance.
It seems that the user has completed all the steps successfully but is having trouble registering on the WatchPower app. Additional information would be required to provide a solution.
I have added a new device on watchPower but cannot see it at all. also I can see the device and its working on Fronus Solar.
Please help
Thanks
It seems like there may be an issue with the WatchPower program not displaying the newly added device. However, the device is visible and functioning on Fronus Solar. The user is seeking help in resolving this issue.
Hi, I need to install WatchPower on a Raspberry Pi 3 with Raspbian as operative system. How can I install the software? I tried to copy the directory WatchPower on desktop and to execute the file WatchPower but it doesn't work. Thank in advance for your answer.
You need to download the correct version of WatchPower for your Raspbian installation. I know that Raspbian works with 64bit architecture, therefore the Linux x64 package is needed.
Access the following link and save the Linux X64 package. Extract it using the following command unzip file.zip -d destination_folder (for example unzip 1.11WatchPower-linux-64bit.zip -d /tmp/watchpower)
Browse to the extraction folder using cd /tmp/watchpower and then type ./WatchPower. If you need to make the file executable, type chmod +x WatchPower and then run the command.
Just installed and its as useful a teets on a bull because i cannot log in
4.1.2. Password
It’s password configuration for administrator only . Before operating and configuring the
software, please login first and mo dify the password. The default password is
administrator at first log in Users can only browse i nverter s tatus and information
as Guest without login as an Administrator . A g uest ca n not control or execute any
setting.
WatchPower 1.09 has no installer. I faced rights issues on Windows 10 putting the extraction folder on D drive. Application's interface simply does not open. Changing the location on desktop started the application. When are you plan to release the installer or please provide to users more info related to the product installation?
I've installed this application on Windows 19 64bit and it works just fine. There were no errors with the security rights. When I've initiated the install procedure, I've used Run as Administrator on the installation package and everything worked out of the box. The same goes for the starting of the application. I've used the same method on a Windows 10 x64 computer and there were no errors.
The package I used is available through the download page at Software Informer: http://watchpower.software.informer.com/download/
I forgot the logging username to my wifi watchpower android app and now I'm stuck at login page, please help
Iam buing a used voltronic inverter,and i discover that there is an existing account for this inverter.so please i want to register a new private accout.
I need to deregister a module and start fresh
To deregister a module and start fresh in WatchPower for Windows, you can try uninstalling and then reinstalling the program. Alternatively, you can try contacting the software developer for specific instructions on how to deregister a module.
Can I use this software to monitor my Axpert inverter remotely, e.g. from work?
The software supports remote features like SNMP for sending an email when something bad happens with the software or the monitored devices.
I kindly recommend downloading the official user guide for the software which explains the functionality of the software and how it can be configured for various operations including remote connection and administration.
How do I register on the Watchpower app without Wifi. I have a Kodak OG5.48 inverter that works with bluetooth.
Unfortunately, registration on the WatchPower app requires internet access, either through wifi or mobile data. Without internet access, it is not possible to register on the app.